There must be a second permanent conventional heating system capable of maininting all areas with plumbing to a minimum of 50 degrees.
there must be a conventional heating system to maintain a 50 degrees in plumbing area.
where is the damper located on a wood burning stove
Appraisal must require a thermostatically controlled heat source that meets safety and health requirements.
Must be able to maintain 50 degrees
must be able to maintain 50degrees
unsure
maintain 50 degrees in plumbing areas
how many holes in the damper
there must be a conventional heating system to maintain 50 degrees in plumbing area
there must be a conventional heating system to maintain 50 degrees in plumbing area
there must be a conventional heating system to maintain 50 degrees in plumbing area
there must be a conventional heating system to maintain a 50 degrees in plumbing area.
there must be a conventional heating system to maintain a 50 degrees in plumbing area.
it must conform to local standards, most probabley be a fixed source and heat to a
minimum of 50 degress
it is not acceptable and central heat to be installed
A conventional heating system must be operational to sustain temps of 50 deg F, where
plumbing is located.
|